AW Addressable MCFA

Addressable Fire Alarm Panel AW-AFP2188

Features:

The AW-AFP2188 is a new type of analog fire alarm control panel which has 324 alarm control points (detectors and modules which are characterized by fully mixed coding, non-polarity and two buses). It complies with the provisions of both Fire Alarm Control Units (GB4717-2005) and Automatic Control System for Fire Protection (GB16806-2006).

Its characteristics are as follows:

• The  intelligent  detectors  and  the  intelligent  modules  have  internal  microprocessors  to realize digital filtering and auto-compensation functions; the data collection is true and reliable; the AW-AFP2188 control panel can carry out data processing based on fuzzy control theory and modern fire alarm theory to fundamentally avoid missing alarms and to reduce false alarms, so as to improve reliability.
• The detectors have a sensitivity setup function and can adjust the alarm sensitivity according to the specific environment and their influences.
• The detecting bus and the control bus share a two-wire structure and have non-polarity and fully mixed coding of the detectors and modules, and the intelligent detectors and the intelligent modules can be directly connected to them, which greatly simplifies the system wiring, engineering installation and circuit maintenance.
• The system uses an AC-DC master-standby power supply system which will automatically change between the master and standby power supplies in the event of a power failure of either of the two power supplies to ensure uninterrupted operation of the system.
• The AW-AFP2188 can be connected to a special mini-printer to realize real-time printing.
• The AW-AFP2188 can be connected to floor fire display panels to display fire alarms by standard RS-485
• The AW-AFP2188 can be connected to ten multi-line linkage control/monitoring points to control and monitor important equipment.
• The AW-AFP2188 is equipped with eight bus manual control points, which makes it very easy for the user to control related equipment.

Order information:

1. AW-AFP2188-100: 100 addresses panel
2. AW-AFP2188-200: 200 addresses panel
3. AW-AFP2188-324: 324 addresses panel

Repeater AW-RP2188

Features:

• Each display panel is connected with a fire alarm control panel via a RS-48 bus. At most 99 display panels may be connected with each RS-485 bus.
• The display panels can display fire alarm messages or feedback messages only rather than fault messages, action messages or other messages.
• A fire alarm control panel may be used for setting the display area of a display panel. The set display panel can display the fire alarm messages of the designated area (floor display) only. Note: See the User’s Manual of the fire alarm control panel for the setting method.